12900 34th St N, Clearwater, Fl 33762
(Click Address for Google Map)
Telephone (727) 561-9334
Fax (727) 561-9336
Toll Free (800) 633-4066
sales@floridapowdercoater.com

Physical Plant: 31000 square foot building.

Our facility can accommodate trucks and tractors with oversized loads and has
crane and material handling equipment capable of handling up to 40,000 lbs.

Our Automated Line includes*:

An Automated Line that is 950 feet in length which accommodates a part with weight of up to 75 pounds per hook
and overall dimension of up to 96” height, 38” width, and 24 feet length.

Cure Oven of 165 feet capable of achieving 550 degrees F.

Five (5) stage automated washer.

Dry off oven.

Primary powder spray booth with two (2) manual spray stations and up to eight (8) automated spray guns.

The Secondary spray booth has two (2) manual spray stations to spray primer or initial coat.

Infrared station to gel cure first coat from secondary booth before part enters primary spray booth.

All spraying is done in an Environmental Room.

Our Batch Cure Area:

 The oven is capable of accommodating a part profile of 60 feet Length, 11.5 feet Height, & 11 feet Width, and total weight in oven up to 40,000 pounds.

Manual five (5) stage washer to accommodate above part profile.

The sixty (60) foot Batch Cure Oven is capable of achieving 550 degrees F.

The batch spray booth has up to 4 manual guns capable of accommodating a part of above profile.

Our In-house Sandblast Facility:

The part profile is up to 24 feet length,8’ Height, and 6’ Width.

Primary blast medium is aluminum oxide.

On-site welding:

Welding to include all metals with both MIG and TIG capabliites.

We are an approved applicator for Kynar® coatings and will have completed the
Kynar® is a registered trademark of Arkema, Philadelphia, PA
ASI 9000 Compliance certification by the Fall of 2009

*Some features of the Automated Line will not be completed until July 31,2009.